BHFMX - GOLD BOND POLYSULFIDE SEALANT

Product Identification

Product ID:GOLD BOND POLYSULFIDE SEALANT
MSDS Date:01/01/1987
FSC:8040
NIIN:00-145-0439
Kit Part:Y
MSDS Number: BHFMX

Responsible Party
BAKER SEALANTS AND COATINGS CO.
234 SUYDAM AVENUE
JERSEY CITY, NJ 07304
US

Emergency Phone: 201-333-6986

Info Phone: 201-33-6986

Cage: 34094

Contractor
BAKER SEALANTS AND COATINGS CO
JERSEY CITY, NJ 07304-3306 US

Telephone: 201-333-6986

Cage: 34094

Ingredients

PIGMENTS

Fraction By Weight: 38.77%


CATALYST

Fraction By Weight: 7.70%


VEHICLE

Fraction By Weight: 47.99%


SOLVENTS

Fraction By Weight: 5.54%


LEAD PEROXIDE (CATALYST)

CAS: 1309-60-0

RTECS: OG0700000

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:NOT KNOWN

First Aid

First Aid:EYES: FLUSH WITH WATER. SKIN: WASH WITH SOAP AND WATER. AND
BREATHING; REMOVE TOFRESH AIR. "OBJECT IS TO GET MEDICAL ATTENTION
IMMEDIATELY"

Fire Fighting

Flash Point:> 212 F/100.00 C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, OR DRY CHEMICAL OF FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:COVER SPILL WITH ABSORBENT. SHOVEL INTO
CONTAINERS

Handling

Handling and Storage Precautions:WASH HANDS AFTER USING. AVOID
INGESTION OF CATALYST. KEEP FROM ALL SOURCES OF IGNITION
Other Precautions:NA

Exposure Controls

Respiratory Protection:SELF CONTAINED BREATHING APPARATUS
Ventilation:LOCAL EXHAUST NORMALLY GOOD
Protective Gloves:RUBBER GLOVES
Eye Protection:GOGGLES
Other Protective Equipment:NORMAL CLOTHING AND SHOES
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.546
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK VISCOUS LIQUID
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NA
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:HEAT & MIXING WITH CATALYST WILL
CAUSE POLYMERIZATION, BUT NOT HAZARDOUS

Disposal

Waste Disposal Methods:AS PER LOCAL, STATE OR FEDERAL REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.